x

1 files changed, 6 insertions, 6 deletions

diff --git a/lapic.c b/lapic.c
index d88a702..4bf2618 100644
--- a/lapic.c
+++ b/lapic.c
@@ -25,7 +25,7 @@
   #define DEASSERT   0x00000000
   #define LEVEL      0x00008000   // Level triggered
   #define BCAST      0x00080000   // Send to all APICs, including self.
- /#define BUSY       0x00001000
+  #define BUSY       0x00001000
   #define FIXED      0x00000000
 #define ICRHI   (0x0310/4)   // Interrupt Command [63:32]
 #define TIMER   (0x0320/4)   // Local Vector Table 0 (TIMER)
@@ -53,19 +53,19 @@ lapicw(int index, int value)
 void
 lapicinit(void)
 {
-  if(!lapic) 
+  if(!lapic)
     return;
 
   // Enable local APIC; set spurious interrupt vector.
   lapicw(SVR, ENABLE | (T_IRQ0 + IRQ_SPURIOUS));
 
   // The timer repeatedly counts down at bus frequency
-  // from lapic[TICR] and then issues an interrupt.  
+  // from lapic[TICR] and then issues an interrupt.
   // If xv6 cared more about precise timekeeping,
   // TICR would be calibrated using an external time source.
   lapicw(TDCR, X1);
   lapicw(TIMER, PERIODIC | (T_IRQ0 + IRQ_TIMER));
-  lapicw(TICR, 10000000); 
+  lapicw(TICR, 10000000);
 
   // Disable logical interrupt lines.
   lapicw(LINT0, MASKED);
@@ -141,7 +141,7 @@ lapicstartap(uchar apicid, uint addr)
 {
   int i;
   ushort *wrv;
-  
+
   // "The BSP must initialize CMOS shutdown code to 0AH
   // and the warm reset vector (DWORD based at 40:67) to point at
   // the AP startup code prior to the [universal startup algorithm]."
@@ -158,7 +158,7 @@ lapicstartap(uchar apicid, uint addr)
   microdelay(200);
   lapicw(ICRLO, INIT | LEVEL);
   microdelay(100);    // should be 10ms, but too slow in Bochs!
-  
+
   // Send startup IPI (twice!) to enter code.
   // Regular hardware is supposed to only accept a STARTUP
   // when it is in the halted state due to an INIT.  So the second