1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
/*
* Minimal PIO-based (non-interrupt-driven) IDE driver code.
* For information about what all this IDE/ATA magic means,
* see the materials available on the class references page.
*/
#include "types.h"
#include "param.h"
#include "mmu.h"
#include "proc.h"
#include "defs.h"
#include "x86.h"
#define IDE_BSY 0x80
#define IDE_DRDY 0x40
#define IDE_DF 0x20
#define IDE_ERR 0x01
static int diskno = 0;
static int
ide_wait_ready(int check_error)
{
int r;
while (((r = inb(0x1F7)) & (IDE_BSY|IDE_DRDY)) != IDE_DRDY)
/* do nothing */;
if (check_error && (r & (IDE_DF|IDE_ERR)) != 0)
return -1;
return 0;
}
int
ide_probe_disk1(void)
{
int r, x;
// wait for Device 0 to be ready
ide_wait_ready(0);
// switch to Device 1
outb(0x1F6, 0xE0 | (1<<4));
// check for Device 1 to be ready for a while
for (x = 0; x < 1000 && (r = inb(0x1F7)) == 0; x++)
/* do nothing */;
// switch back to Device 0
outb(0x1F6, 0xE0 | (0<<4));
cprintf("Device 1 presence: %d\n", (x < 1000));
return (x < 1000);
}
void
ide_set_disk(int d)
{
if (d != 0 && d != 1)
panic("bad disk number");
diskno = d;
}
int
ide_read(uint32_t secno, void *dst, unsigned nsecs)
{
int r;
if(nsecs > 256)
panic("ide_read");
ide_wait_ready(0);
outb(0x3f6, 0);
outb(0x1F2, nsecs);
outb(0x1F3, secno & 0xFF);
outb(0x1F4, (secno >> 8) & 0xFF);
outb(0x1F5, (secno >> 16) & 0xFF);
outb(0x1F6, 0xE0 | ((diskno&1)<<4) | ((secno>>24)&0x0F));
outb(0x1F7, 0x20); // CMD 0x20 means read sector
sleep(0);
for (; nsecs > 0; nsecs--, dst += 512) {
if ((r = ide_wait_ready(1)) < 0)
return r;
insl(0x1F0, dst, 512/4);
}
return 0;
}
int
ide_write(uint32_t secno, const void *src, unsigned nsecs)
{
int r;
if(nsecs > 256)
panic("ide_write");
ide_wait_ready(0);
outb(0x1F2, nsecs);
outb(0x1F3, secno & 0xFF);
outb(0x1F4, (secno >> 8) & 0xFF);
outb(0x1F5, (secno >> 16) & 0xFF);
outb(0x1F6, 0xE0 | ((diskno&1)<<4) | ((secno>>24)&0x0F));
outb(0x1F7, 0x30); // CMD 0x30 means write sector
for (; nsecs > 0; nsecs--, src += 512) {
if ((r = ide_wait_ready(1)) < 0)
return r;
outsl(0x1F0, src, 512/4);
}
return 0;
}
|
