path: root/mmu.h

/*
 * This file contains definitions for the x86 memory management unit (MMU),
 * including paging- and segmentation-related data structures and constants,
 * the %cr0, %cr4, and %eflags registers, and traps.
 */

/*
 *
 *	Part 1.  Paging data structures and constants.
 *
 */

// A linear address 'la' has a three-part structure as follows:
//
// +--------10------+-------10-------+---------12----------+
// | Page Directory |   Page Table   | Offset within Page  |
// |      Index     |      Index     |                     |
// +----------------+----------------+---------------------+
//  \--- PDX(la) --/ \--- PTX(la) --/ \---- PGOFF(la) ----/
//  \----------- PPN(la) -----------/
//
// The PDX, PTX, PGOFF, and PPN macros decompose linear addresses as shown.
// To construct a linear address la from PDX(la), PTX(la), and PGOFF(la),
// use PGADDR(PDX(la), PTX(la), PGOFF(la)).

// page number field of address
#define PPN(la)		(((uintptr_t) (la)) >> PTXSHIFT)
#define VPN(la)		PPN(la)		// used to index into vpt[]

// page directory index
#define PDX(la)		((((uintptr_t) (la)) >> PDXSHIFT) & 0x3FF)
#define VPD(la)		PDX(la)		// used to index into vpd[]

// page table index
#define PTX(la)		((((uintptr_t) (la)) >> PTXSHIFT) & 0x3FF)

// offset in page
#define PGOFF(la)	(((uintptr_t) (la)) & 0xFFF)

// construct linear address from indexes and offset
#define PGADDR(d, t, o)	((void*) ((d) << PDXSHIFT | (t) << PTXSHIFT | (o)))

// Page directory and page table constants.
#define NPDENTRIES	1024		// page directory entries per page directory
#define NPTENTRIES	1024		// page table entries per page table

#define PGSIZE		4096		// bytes mapped by a page
#define PGSHIFT		12		// log2(PGSIZE)

#define PTSIZE		(PGSIZE*NPTENTRIES) // bytes mapped by a page directory entry
#define PTSHIFT		22		// log2(PTSIZE)

#define PTXSHIFT	12		// offset of PTX in a linear address
#define PDXSHIFT	22		// offset of PDX in a linear address

// Page table/directory entry flags.
#define PTE_P		0x001	// Present
#define PTE_W		0x002	// Writeable
#define PTE_U		0x004	// User
#define PTE_PWT		0x008	// Write-Through
#define PTE_PCD		0x010	// Cache-Disable
#define PTE_A		0x020	// Accessed
#define PTE_D		0x040	// Dirty
#define PTE_PS		0x080	// Page Size
#define PTE_MBZ		0x180	// Bits must be zero

// The PTE_AVAIL bits aren't used by the kernel or interpreted by the
// hardware, so user processes are allowed to set them arbitrarily.
#define PTE_AVAIL	0xE00	// Available for software use

// Only flags in PTE_USER may be used in system calls.
#define PTE_USER	(PTE_AVAIL | PTE_P | PTE_W | PTE_U)

// address in page table entry
#define PTE_ADDR(pte)	((physaddr_t) (pte) & ~0xFFF)

// Control Register flags
#define CR0_PE		0x00000001	// Protection Enable
#define CR0_MP		0x00000002	// Monitor coProcessor
#define CR0_EM		0x00000004	// Emulation
#define CR0_TS		0x00000008	// Task Switched
#define CR0_ET		0x00000010	// Extension Type
#define CR0_NE		0x00000020	// Numeric Errror
#define CR0_WP		0x00010000	// Write Protect
#define CR0_AM		0x00040000	// Alignment Mask
#define CR0_NW		0x20000000	// Not Writethrough
#define CR0_CD		0x40000000	// Cache Disable
#define CR0_PG		0x80000000	// Paging

#define CR4_PCE		0x00000100	// Performance counter enable
#define CR4_MCE		0x00000040	// Machine Check Enable
#define CR4_PSE		0x00000010	// Page Size Extensions
#define CR4_DE		0x00000008	// Debugging Extensions
#define CR4_TSD		0x00000004	// Time Stamp Disable
#define CR4_PVI		0x00000002	// Protected-Mode Virtual Interrupts
#define CR4_VME		0x00000001	// V86 Mode Extensions

// Eflags register
#define FL_CF		0x00000001	// Carry Flag
#define FL_PF		0x00000004	// Parity Flag
#define FL_AF		0x00000010	// Auxiliary carry Flag
#define FL_ZF		0x00000040	// Zero Flag
#define FL_SF		0x00000080	// Sign Flag
#define FL_TF		0x00000100	// Trap Flag
#define FL_IF		0x00000200	// Interrupt Flag
#define FL_DF		0x00000400	// Direction Flag
#define FL_OF		0x00000800	// Overflow Flag
#define FL_IOPL_MASK	0x00003000	// I/O Privilege Level bitmask
#define FL_IOPL_0	0x00000000	//   IOPL == 0
#define FL_IOPL_1	0x00001000	//   IOPL == 1
#define FL_IOPL_2	0x00002000	//   IOPL == 2
#define FL_IOPL_3	0x00003000	//   IOPL == 3
#define FL_NT		0x00004000	// Nested Task
#define FL_RF		0x00010000	// Resume Flag
#define FL_VM		0x00020000	// Virtual 8086 mode
#define FL_AC		0x00040000	// Alignment Check
#define FL_VIF		0x00080000	// Virtual Interrupt Flag
#define FL_VIP		0x00100000	// Virtual Interrupt Pending
#define FL_ID		0x00200000	// ID flag

// Page fault error codes
#define FEC_PR		0x1	// Page fault caused by protection violation
#define FEC_WR		0x2	// Page fault caused by a write
#define FEC_U		0x4	// Page fault occured while in user mode


/*
 *
 *	Part 2.  Segmentation data structures and constants.
 *
 */

#ifdef __ASSEMBLER__

/*
 * Macros to build GDT entries in assembly.
 */
#define SEG_NULL						\
	.word 0, 0;						\
	.byte 0, 0, 0, 0
#define SEG(type,base,lim)					\
	.word (((lim) >> 12) & 0xffff), ((base) & 0xffff);	\
	.byte (((base) >> 16) & 0xff), (0x90 | (type)),		\
		(0xC0 | (((lim) >> 28) & 0xf)), (((base) >> 24) & 0xff)

#else	// not __ASSEMBLER__

// Segment Descriptors
struct Segdesc {
	unsigned lim_15_0 : 16;  // Low bits of segment limit
	unsigned base_15_0 : 16; // Low bits of segment base address
	unsigned base_23_16 : 8; // Middle bits of segment base address
	unsigned type : 4;       // Segment type (see STS_ constants)
	unsigned s : 1;          // 0 = system, 1 = application
	unsigned dpl : 2;        // Descriptor Privilege Level
	unsigned p : 1;          // Present
	unsigned lim_19_16 : 4;  // High bits of segment limit
	unsigned avl : 1;        // Unused (available for software use)
	unsigned rsv1 : 1;       // Reserved
	unsigned db : 1;         // 0 = 16-bit segment, 1 = 32-bit segment
	unsigned g : 1;          // Granularity: limit scaled by 4K when set
	unsigned base_31_24 : 8; // High bits of segment base address
};
// Null segment
#define SEG_NULL	(struct Segdesc){ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
// Segment that is loadable but faults when used
#define SEG_FAULT	(struct Segdesc){ 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 1, 0, 0 }
// Normal segment
#define SEG(type, base, lim, dpl) (struct Segdesc)			\
{ ((lim) >> 12) & 0xffff, (base) & 0xffff, ((base) >> 16) & 0xff,	\
    type, 1, dpl, 1, (unsigned) (lim) >> 28, 0, 0, 1, 1,		\
    (unsigned) (base) >> 24 }
#define SEG16(type, base, lim, dpl) (struct Segdesc)			\
{ (lim) & 0xffff, (base) & 0xffff, ((base) >> 16) & 0xff,		\
    type, 1, dpl, 1, (unsigned) (lim) >> 16, 0, 0, 1, 0,		\
    (unsigned) (base) >> 24 }

#endif /* !__ASSEMBLER__ */

// Application segment type bits
#define STA_X		0x8	    // Executable segment
#define STA_E		0x4	    // Expand down (non-executable segments)
#define STA_C		0x4	    // Conforming code segment (executable only)
#define STA_W		0x2	    // Writeable (non-executable segments)
#define STA_R		0x2	    // Readable (executable segments)
#define STA_A		0x1	    // Accessed

// System segment type bits
#define STS_T16A	0x1	    // Available 16-bit TSS
#define STS_LDT		0x2	    // Local Descriptor Table
#define STS_T16B	0x3	    // Busy 16-bit TSS
#define STS_CG16	0x4	    // 16-bit Call Gate
#define STS_TG		0x5	    // Task Gate / Coum Transmitions
#define STS_IG16	0x6	    // 16-bit Interrupt Gate
#define STS_TG16	0x7	    // 16-bit Trap Gate
#define STS_T32A	0x9	    // Available 32-bit TSS
#define STS_T32B	0xB	    // Busy 32-bit TSS
#define STS_CG32	0xC	    // 32-bit Call Gate
#define STS_IG32	0xE	    // 32-bit Interrupt Gate
#define STS_TG32	0xF	    // 32-bit Trap Gate


/*
 *
 *	Part 3.  Traps.
 *
 */

#ifndef __ASSEMBLER__

// Task state segment format (as described by the Pentium architecture book)
struct Taskstate {
	uint32_t link;	// Old ts selector
	uintptr_t esp0;	// Stack pointers and segment selectors
	uint16_t ss0;	//   after an increase in privilege level
	uint16_t padding1;
	uintptr_t esp1;
	uint16_t ss1;
	uint16_t padding2;
	uintptr_t esp2;
	uint16_t ss2;
	uint16_t padding3;
	physaddr_t cr3;	// Page directory base
	uintptr_t eip;	// Saved state from last task switch
	uint32_t eflags;
	uint32_t eax;	// More saved state (registers)
	uint32_t ecx;
	uint32_t edx;
	uint32_t ebx;
	uintptr_t esp;
	uintptr_t ebp;
	uint32_t esi;
	uint32_t edi;
	uint16_t es;		// Even more saved state (segment selectors)
	uint16_t padding4;
	uint16_t cs;
	uint16_t padding5;
	uint16_t ss;
	uint16_t padding6;
	uint16_t ds;
	uint16_t padding7;
	uint16_t fs;
	uint16_t padding8;
	uint16_t gs;
	uint16_t padding9;
	uint16_t ldt;
	uint16_t padding10;
	uint16_t t;		// Trap on task switch
	uint16_t iomb;	// I/O map base address
};

// Gate descriptors for interrupts and traps
struct Gatedesc {
	unsigned off_15_0 : 16;   // low 16 bits of offset in segment
	unsigned ss : 16;         // segment selector
	unsigned args : 5;        // # args, 0 for interrupt/trap gates
	unsigned rsv1 : 3;        // reserved(should be zero I guess)
	unsigned type : 4;        // type(STS_{TG,IG32,TG32})
	unsigned s : 1;           // must be 0 (system)
	unsigned dpl : 2;         // descriptor(meaning new) privilege level
	unsigned p : 1;           // Present
	unsigned off_31_16 : 16;  // high bits of offset in segment
};

// Set up a normal interrupt/trap gate descriptor.
// - istrap: 1 for a trap (= exception) gate, 0 for an interrupt gate.
// - sel: Code segment selector for interrupt/trap handler
// - off: Offset in code segment for interrupt/trap handler
// - dpl: Descriptor Privilege Level -
//	  the privilege level required for software to invoke
//	  this interrupt/trap gate explicitly using an int instruction.
#define SETGATE(gate, istrap, sel, off, d)			\
{								\
	(gate).off_15_0 = (uint32_t) (off) & 0xffff;		\
	(gate).ss = (sel);					\
	(gate).args = 0;					\
	(gate).rsv1 = 0;					\
	(gate).type = (istrap) ? STS_TG32 : STS_IG32;	\
	(gate).s = 0;					\
	(gate).dpl = (d);					\
	(gate).p = 1;					\
	(gate).off_31_16 = (uint32_t) (off) >> 16;		\
}

// Set up a call gate descriptor.
#define SETCALLGATE(gate, ss, off, d)           	        \
{								\
	(gate).off_15_0 = (uint32_t) (off) & 0xffff;		\
	(gate).ss = (ss);					\
	(gate).args = 0;					\
	(gate).rsv1 = 0;					\
	(gate).type = STS_CG32;				\
	(gate).s = 0;					\
	(gate).dpl = (d);					\
	(gate).p = 1;					\
	(gate).off_31_16 = (uint32_t) (off) >> 16;		\
}

// Pseudo-descriptors used for LGDT, LLDT and LIDT instructions.
struct Pseudodesc {
	uint16_t _garbage;         // LGDT supposed to be from address 4N+2
	uint16_t lim;              // Limit
	uint32_t base __attribute__ ((packed));       // Base address
};
#define PD_ADDR(desc)	(&(desc).pd_lim)

#endif /* !__ASSEMBLER__ */